This design contains a small UART that will output a string every ~1s. No input is required. It expect a 10 MHz clock.
You simply need to connect an UART RX on uo_out[0] and you will see my name ! UART is 115200 baud, one start bit, eight bit of data, one parity bit and one stop bit. I generate a sinus signal on uo_out[7:1].
| # | Input | Output | Bidirectional |
|---|---|---|---|
| 0 | |||
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 |