This project was created during the Hackaday Conference 2024 and shows two simple animations on the 7seg display. It takes the clock input (10kHz) and divides it down depending on the input 7. The mode input 0 either shows the letters F and H or is switched to the rotation animation.
Inputs
SW1 - IN0 = Mode (FH or Rotation Animation)
SW2 - IN1 = Blinking (turns dot on/off)
SW3 - IN2 = unused
SW4 - IN3 = unused
SW5 - IN4 = unused
SW6 - IN5 = Pause (if switched on, animation will freeze)
SW7 - IN6 = Debug (if switched on, divider will stop)
SW8 - IN7 = Divider (fast an slow)
Apply clock (10khz) and watch the 7seg display
If all inputs are off the 7seg display will show alternating letters F and H
If switch SW1 is on the 7seg display will show the rotation animation
Toggle SW2 to disable the dot blinking
Toggle SW6 to pause
Toggle SW8 to change speed
SW7 is for debugging divider
The 7Seg LED display is used on outputs
| # | Input | Output | Bidirectional |
|---|---|---|---|
| 0 | |||
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | |||
| 6 | |||
| 7 |